Last updated 1 November 2026

1. Summary

Cutting Edge Tooling for Machine Tools ("CET") gives no warranty on the products it sells. Products are supplied "as is". Cutting tools are consumable items whose working life depends on how they are selected, set up and run, none of which is within CET's control.

This Policy forms part of the Terms of Sale published on the Website and sets out clause 9 of those Terms in full. Where a product carries a warranty from its manufacturer, that warranty is the manufacturer's and not CET's.

2. No Warranty from CET

To the fullest extent permitted by applicable law, CET gives no warranty, guarantee, condition or representation of any kind, express or implied, in relation to the products it supplies, and in particular gives no warranty of:

  • merchantability or satisfactory quality;
  • fitness for any particular purpose or application;
  • durability, tool life, regrind count or number of parts produced;
  • cutting performance, output rate, surface finish or dimensional yield;
  • any machining result whatsoever.

No advice, product description, catalogue entry, application guide, recommended cutting data or technical suggestion given by CET or its staff creates a warranty or forms part of the contract of sale.

3. Manufacturer Warranties

Some products carry a warranty given by their manufacturer. Where that is the case:

  • the warranty is given by the manufacturer, not by CET, and is subject to the manufacturer's own conditions, exclusions and time limits;
  • CET is not the obligor under it and does not administer, fund or guarantee it;
  • CET makes no representation that such a warranty exists, remains in force, applies to your purchase, or will be honoured;
  • the claim is made against the manufacturer directly. On request, CET will pass on the manufacturer information available to it so that you can do so.

4. What Is Never Covered

No replacement, repair, credit, refund or other remedy is provided by CET in respect of:

  • ordinary wear, dulling or loss of cutting edge through use;
  • breakage, chipping, fracture, edge failure or catastrophic tool failure;
  • coating wear, delamination or discolouration through use;
  • tool life, number of parts produced or regrind count falling short of expectation;
  • regrinding, re-sharpening, re-coating, re-tipping or any other modification of a product;
  • incorrect selection or specification by the customer, including wrong size, grade, geometry, chipbreaker or coating;
  • tool holder, collet, adaptor or machine incompatibility, excessive runout or inadequate clamping;
  • incorrect speeds, feeds, depth of cut, step-over, coolant concentration, coolant delivery or lubrication;
  • application to a workpiece material, hardness or condition for which the product is not suited;
  • interrupted cuts, scale, inclusions, chatter, vibration, worn spindles or unstable setups;
  • operation outside the manufacturer's published parameters, or unsafe operation;
  • damage arising from storage, handling, contamination or corrosion after delivery;
  • products that have been used, mounted, modified, resharpened, resold or supplied onward by the customer.

Ordinary wear, consumable tool life and breakage alone do not establish a manufacturing defect.

5. Selecting the Right Tool

Responsibility for selecting the correct product for your application rests with you. Review the manufacturer part number and the technical specification before ordering, and contact info@ce-tooling.com before placing an order where there is any uncertainty about dimensions, tool-holder compatibility, insert grade or intended application.

Products must be used safely, in accordance with manufacturer guidance and applicable workshop safety standards.

6. What You Can Claim

This Policy is not a returns policy. A delivery that does not match your order - the wrong product, a short delivery, or damage visible on receipt - is dealt with under the Return & Refund Policy published on the Website, and must be notified within three (3) calendar days of delivery.

There is no other route to a replacement or refund.

7. Investigating an Alleged Defect

CET may request relevant technical information, the affected products and machining details in order to investigate an alleged defect, and may refer the matter to the manufacturer. A claim will not be considered without that information. Investigating a claim is not an admission that any warranty exists or that any remedy is owed.

8. Sole Remedy and Limit of Liability

Where applicable law imposes an obligation on CET in respect of a product that cannot lawfully be excluded, your sole and exclusive remedy is, at CET's option, replacement of the affected product or refund of the price you paid for it, and CET's total liability for that product is limited to that price.

All other remedies are excluded, including repair, rework, substitution, re-performance and credit beyond the price of the affected product. CET is not responsible for the cost of removing or refitting tooling, scrapped workpieces, machine damage, labour, downtime, lost production, lost profit or any other indirect or consequential loss.

9. Mandatory Rights, Changes and Contact

The Website sells to businesses. By creating an account or placing an order you declare that you are purchasing in a commercial or professional capacity and not as a consumer, and this Policy is written on that basis.

Nothing in this Policy excludes or limits a right or remedy that cannot lawfully be excluded under the law of the State of Qatar, including liability for fraud, liability for death or personal injury caused by negligence, and any mandatory remedy that applies if a sale is nonetheless treated as a consumer sale.

CET may update this Policy for future orders by publishing a revised version on the Website. The version applicable to an order is the one published when the order was placed.

For questions about this Policy, contact info@ce-tooling.com.

Legal entity: Cutting Edge Tooling for Machine Tools | Commercial Registration No. 246027 | Doha, State of Qatar.